EasyManua.ls Logo

Pentax Q7 - Focusing; Focus Method; Setting the Autofocus Method

Pentax Q7
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Shooting
36
Set [Focus Method] to v or w in the control panel or [AF/MF
Settings] of the A1 menu.
tMemo
•In v mode, when the subject is in a dark location, the AF
assist light is used when the shutter release button is pressed
halfway. To change the setting, set [AF Assist Light] in [AF/
MF Settings] of the A1 menu.
You can use M to focus on the subject. In that case, the
autofocus by pressing the shutter release button halfway is
disabled. (p.62)
•In v mode, focus ring operations can be disabled to prevent
accidentally moving the lens focus ring and causing the
picture to be out of focus. Set in [10. Focus Ring in AF Mode]
of the E2 menu.
You can choose from the following autofocus methods.
tMemo
Fixed to e or f depending on the capture mode. (p.69)
•In v mode, you can take pictures only when the subject is
in focus. To take pictures when the subject is not in focus, set
[8. AF Release Options] to [Release-priority] in the E2 menu.
Selecting e, g, h or i enables to lock the focus and
recompose the picture while the shutter release button is
pressed halfway.
Focusing
Focus Method
v/A1
Setting the Autofocus Method
v/A1
e
Face
Detection
Detects and tracks faces of people.
The main face detection frame for AF and
AE is displayed in yellow.
f Tracking
Tracks the subject in focus.
The shutter can be released by pressing
the shutter release button fully even if the
subject is not in focus.
g
Multiple AF
Points
Sets the focusing area to the desired area.
(Default setting)
The sensor is divided into 49 areas (7
horizontal by 7 vertical), and you can select
a wider or narrower focusing area by using
25, 9, or just 1 of those 49 areas available.
h
Select
Sets the focusing area by the number of
pixels.
i Spot
Sets the focusing area to a limited area at
the center.

Table of Contents

Related product manuals