5
Settings
65
tMemo
• Refer to “List of World Time Cities” (p.82) for cities that can be
selected as a hometown or destination.
• Select [F Hometown] in Step 3 to change the city and DST
settings for the hometown.
• G appears in the control panel and guide display if [Time
Setting] is set to G. Also, the video output setting changes to
the video output format for that city.
Most of the functions set on this camera are saved even if the
camera is turned off. For the following function settings, you can
select whether to save the settings (T ) or to return the settings
to their default values (S) when the camera is turned off.
Set in [Memory] of the A3 menu.
tMemo
• When [Reset] of the D3 menu is performed, all Memory
settings return to the default values.
You can protect images from being accidentally deleted.
uCaution
• Even protected images are deleted if the inserted memory
card is formatted.
1 Select Y in the playback mode palette.
The screen for selecting the unit for processing appears.
2 Select the unit and press E.
If you selected [All images], proceed to
Step 4.
3 Use V to select an image.
4 Select [Protect] and press E.
Repeat Steps 3 and 4 to protect other images.
5 Press F to finish the setting.
Selecting Settings to Save in the
Camera
A3
Function
Default
Setting
Function
Default
Setting
Flash Mode T
Flash Exposure
Compensation
T
Drive Mode T Focus Position S
White Balance T Digital Filter S
Custom Image T HDR Capture S
Sensitivity T
Playback Info
Display
T
EV Compensation T
File Management Settings
Protecting Images from Deletion
(Protect)
Unprotect
Protect
OK
Exit
OK
MENU
100-0001
To Next Page
Loading...
Need help?
General
Weight and Dimensions
