109
3
Taking Pictures
The camera has the electronic level to detect the tilt of the camera.
When [Electronic Level] in the [A Rec. Mode] menu is set to O (On), the
electronic level appears on the display.
The default setting is O (On).
1
Use the four-way controller (23) to select [Electronic Level]
in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The electronic level is displayed.
P (Off) The electronic level is not displayed.
The setting is saved.
You can attach the RICOH Wide Conversion Lens DW-5 to shoot pictures at a
lens magnification of 0.8 (equivalent to a 35 mm camera’s 20 mm wide-angle
zoom).
To use the DW-5, select O (On) for [Lens Adapter On] in the [A Rec. Mode]
menu.
1
Use the four-way controller (23) to select [Lens Adapter On]
in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The conversion lens is available.
P (Off) The conversion lens is not available.
The setting is saved.
Setting the Electronic Level
Electronic Level 1p.29
Using a Conversion Lens
To Next Page
Loading...
