Pentax WG-3 GPS - Using Mediaimpression on Macintosh

201
7
Connecting to a Computer
1 Connect the camera to your Macintosh.
Refer to steps 2 to 4 on p.193 for details.
2 Double-click the
[MediaImpression 2.2 LE] icon in
the [Applications] folder.
MediaImpression 2.2 LE starts and the start
page appears.
3 Click [Import].
The Import screen appears.
4 Select an image to transfer.
To select multiple images, choose the
images while pressing the Command key.
To specify the destination location, click the
folder icon.
If any of the “Import Options” are checked,
marks will appear on the images that were
transferred.
Using MediaImpression on Macintosh