Pentax WG-3 GPS - Changing the Sound Settings

169
6
Settings
You can adjust the volume of operation sounds and change the type of sound.
1 Use the four-way controller (23) to select [Sound] in the
[W Setting] menu.
2 Press the four-way controller
(5).
The [Sound] screen appears.
3 Use the four-way controller (23) to select [Operation
Volume].
4 Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound, operation sound,
and self-timer sound.
5 Change [Playback Volume] in the same way as in steps 3 and
4.
3 Use the four-way controller (23) to select [Startup Sound].
4 Press the four-way controller (5).
A pull-down menu appears.
5 Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3], [4], or [Off].
6 Press the 4 button.
7 Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in steps 3 to 6.
Changing the Sound Settings
To Change the Operation Volume/Playback Volume
To Change the Sound Type
MENU
Sound
Operation Volume
1
1
1
Startup Sound
Shutter Sound
Operation Sound
Self-timer Sound
Off
Playback Volume