Pentax WG-3 GPS - Setting the Green Button Function

103
3
Taking Pictures
2 Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On) Instant Review is displayed.
P (Off) Instant Review is not displayed.
The setting is saved.
You can assign one of the following functions to the Green button: [Green Mode]
(p.71) or [Fn Setting] (p.104). You can activate the assigned function by just
pressing the Green button.
1 Use the four-way controller (23) to select [Green Button] in
the [A Rec. Mode] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select a function you want to
assign.
4 Press the 4 button.
The setting is saved.
Instant Review 1p.64
Setting the Green Button Function
When the shooting mode is set to 9 (Green) mode, the Green Button setting
from the [A Rec. Mode] menu is disabled. Switch to a mode other than 9
to access [Green Button] in the [A Rec. Mode] menu.
Assigning a Function to the Green Button
[Green Mode] is assigned to the Green button as the default setting.
MENU
Cancel
OK
OK
Green Button
Fn Setting
Green Mode