181
6
Settings
When you connect the camera to an AV device with an HDMI cable, select an
output resolution for playing back images. The default setting is [Auto].
1
Use the four-way controller (23) to select [HDMI Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select an output format.
Select an HDMI output format to match the output format of an AV device.
4
Press the 4 button.
The setting is saved.
Selecting the HDMI Output Format
The items on the pull-down menu vary depending on the selected video
output format.
To change the setting, change the video output format before changing the
HDMI output format.
The table below shows the combinations of the video output format and HDMI
output format.
Video output format
NTSC PAL
HDMI
output
format
(resolution)
Auto (The maximum resolution that both the
TV and camera support is automatically
selected)
1080i (1920×1080i)
720p (1280×720p)
480p (720×480p) 576p (720×576p)
To Next Page
Loading...
Need help?
General
