154
5
Editing and Printing
19
Press the 9 button.
Returns to the item selection screen.
20
Use the four-way controller (23)
to select [Create an image].
21
Press the 4 button.
A confirmation dialog for saving the image appears.
22
Use the four-way controller (2) to select [Save].
23
Press the 4 button.
The edited image is saved.
You can correct images where the flash has caused the subject to appear with
red eyes.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
2
Use the four-way controller (2345) to select Z (Red-eye
Edit) from the Playback Mode Palette.
3
Press the 4 button.
Saving the Edited Image
The quality level of the image is fixed at C (Best).
Red-eye Edit
• The Red-eye Edit function cannot be used on images taken in F (Digital
Panorama), movies or on images where red eyes cannot be detected on
the camera. An error message appears in step 3.
• The Red-eye Edit function can only be used with still pictures taken with this
camera.
MENU
Recorded Pixels
3
M
Create an image
Layout
Select image(s)
Backgnd.
OK
OK
To Next Page
Loading...
