30
Getting Started
1
Sub-display Indicator
(PENTAX WG-3 GPS Only)
When the camera is turned off, information such as the current time and air
pressure is displayed on the sub-display on the camera's front side.
* 2 changes depending on [Pressure Sensor] settings in [W Setting] menu
(p.190).
1 Current time
2 Height/air pressure
• The sub-display’s back light turns on for five seconds when the shutter
release button is pressed fully.
• You can change the display items by pressing the zoom button. The items
are switched as follows each time the zoom button right is pressed:
Current time → current time + height →current time + air pressure
Press the zoom button left to change the items in the opposite order.
Nothing is displayed at 2 when [Off] is selected for [Pressure Sensor].
• The height that can be displayed on the sub-display is between -300 to
4000 meters when [Not underwater] is selected for [Camera Location].
When the height reaches -300 or 4000 meters, the height value on the sub-
display blinks.
The displayed value is between -15 to 0 meters when [Underwater] is
selected (“d” is displayed instead of “-” on the sub-display). When the water
depth reaches -15 meters, the water depth value on the sub-display blinks.
1
2
To Next Page
Loading...
Need help?
General
