Pentax WG-3 GPS User Manual

37
1
Getting Started
Use of the optional AC adapter kit (K-AC117) is recommended if you intend to use
the camera for a long time or connect it to a computer.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125
V, 7A, minimum 6 ft (1.8 m)”
1 Make sure that the camera is turned off and open the battery
cover.
2 Remove the Battery.
Refer to p.32 - p.33 on how to open the battery cover and remove the battery.
3 Insert the DC coupler.
Using the side of the DC coupler to push the battery lock lever, insert the DC
coupler. Confirm that the DC coupler is locked in place.
The battery cover will not close while the DC coupler is inserted. Leave the cover
open when using the AC adapter and do not attempt to close it.
4 Connect the DC terminal of the AC adapter to the DC terminal
of the DC coupler.
5 Connect the AC plug cord to the AC adapter.
6 Plug the AC plug cord into the power outlet.
Using the AC Adapter
DC terminal
3
1
6
5
DC coupler
4

Pentax WG-3 GPS Specifications

General

Brand	Pentax
Model	WG-3 GPS
Category	Digital Camera
Language	English