34
1
Getting Started
Connect the supplied power adapter (D-PA135) to the camera and charge the
battery before using it for the first time or after a long period of non-use, or when
the [Battery depleted] message appears.
1
Make sure that the camera is turned off and open the battery
cover.
2
Connect the USB cable to the power adapter.
3
Connect the USB cable to the camera.
4
Plug the power adapter into the power outlet.
The power lamp blinks while charging.
When charging is finished, the power lamp turns off.
The battery cover will not close while charging. Leave the cover open when
charging and do not attempt to close it.
5
Unplug the power adapter from the power outlet when
charging is finished.
6
Remove the USB cable from the camera.
7
Close the battery cover.
Charging the Battery
1
2
USB cable
Power adapter
3
To power outlet
Power lamp
While charging: Blinks
Charging finished: Turns off
To Next Page
Loading...
Need help?
General
