Pentax WG-3 GPS User Manual

168
6
Settings
Formatting deletes all the data on the SD Memory Card or in the built-in memory.
Be sure to use this camera to format (initialize) an SD Memory Card that is
unused or has been previously used on other cameras or digital devices.
1 Use the four-way controller (23) to select [Format] in the
[W Setting] menu.
2 Press the four-way controller (5).
The [Format] screen appears.
3 Use the four-way controller (2) to
select [Format].
4 Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q mode.
Formatting the Memory
• Do not remove the SD Memory Card while it is being formatted. This may
damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the card
with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this
camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card
beforehand. Otherwise, the SD Memory Card will be formatted.
OK
OK
Format
All data will be deleted
Format
Cancel

Pentax WG-3 GPS Specifications

General

Brand	Pentax
Model	WG-3 GPS
Category	Digital Camera
Language	English