Pentax WG-3 GPS - Setting the Text Size on the Menu; Changing the Display Language

175
6
Settings
You can set the text size of the item with the selection frame on the menu to
[Standard] (normal display) or [Large] (magnified display).
1 Use the four-way controller (23) to select [Text Size] in the
[W Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select the text size.
Select from [Standard] or [Large].
4 Press the 4 button.
The setting is saved.
You can change the language in which the menus, error messages, etc. are
displayed.
1 Use the four-way controller (23) to select [Language/ ] in
the [W Setting] menu.
2 Press the four-way controller (5).
The [Language/ ] screen appears.
3 Use the four-way controller (2345) to select the desired
language.
4 Press the 4 button.
The menus and messages are displayed in the selected language.
Setting the Text Size on the Menu
Changing the Display Language
1/5
Setting
Standard
01/01/2013
Text Size
Sound
Date Adjustment
Alarm
World Time
MENU
Language
OK
Cancel OK
Large