180
6
Settings
When you connect the camera to an AV device, choose the appropriate video
output format (NTSC or PAL) for taking and playing back images.
1
Use the four-way controller (23) to select [Video Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a video output
format.
Choose the video output format to match the output format of the AV device.
4
Press the 4 button.
The setting is saved.
Changing the Video Output Format
Depending on the country or region, images may fail to be played back if the
video output format is set differently from the one in use there. If this happens,
change the video output format setting.
Connecting the Camera to an AV Device 1p.142
Video Output Format by City 1p.220
To Next Page
Loading...
