81
3
Taking Pictures
2
Use the four-way controller (23) to select an option and
press the 4 button.
In F (Digital Panorama) mode, you can stitch together two or three captured
frames to create a panoramic photograph with the camera.
1
Use the four-way controller (2345) to select F (Digital
Panorama) from the Capture Mode Palette.
2
Press the 4 button.
The camera enters F mode and the message [Set shift direction] is displayed.
3
Use the four-way controller (45)
to choose the direction in which
the images will be joined.
The screen for taking the first frame is
displayed.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.70).
4
Press the shutter release button to take a picture.
The screen for taking the second frame is displayed after you take the first
frame.
If you select right (5) in step 3:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
If you select left (4) in step 3:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
Save
Saves the first image and you can retake the first shot. The first
image is saved at
h
(2048×1536).
Discard Discards the first image and you can retake the first shot.
Cancel Returns to the shooting screen for the second image.
Taking Panoramic Pictures (Digital Panorama
Mode)
Set shift direction
Set shift direction
To Next Page
Loading...
Need help?
General
