40
1
Getting Started
1
Slide the battery cover lock as indicated by 1, and release the
lock.
2
Slide the release latch as indicated by 2, and open the battery
cover towards 3.
3
Insert an SD Memory Card into the SD Memory Card socket so
that the label is facing toward the front of the camera (the side
with the lens).
Push the card in all the way. Images may not be recorded correctly if the card is
not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
4
Close the battery cover, and slide the release latch in the
opposite direction indicated by 2.
5
Slide the battery cover lock in the opposite direction indicated
by 1.
Make sure that the lever clicks and the cover is locked.
If the battery cover is not locked securely, water, sand, or dirt may get into the
camera.
• The image file size varies depending on the number of recorded pixels and
the number of images that can be saved on an SD Memory Card also varies.
•
Set the number of recorded pixels for still pictures from the [
A
Rec. Mode]
menu and for movies from the [
C
Movie] menu.
•
For an approximate number of still pictures and amount of time of movies that
can be saved on an SD Memory Card, see “Main Specifications” (p.221).
SD Memory CardBattery cover
SD Memory
Card socket
To Next Page
Loading...
Need help?
General
