peplink 20 User Manual

USER MANUAL
Peplink Balance Series
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User
Name
It is set as user by default and is not customizable.
User Password
This field allows you to specify a new user password. Once the user password is set, the
feature of read-only user will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can remain idle
before the balance terminatesits access to Web Admin Interface.
By default, it is set as 4 hours.
Authentication by
RADIUS
With this box is checked, Web Admin will authenticate using an external RADIUS server.
Authenticated users are treated as "admin" with full read-write permission or “user” with
read-only access.Local "admin" and "user" accounts will be disabled. When the device is
not able to communicate with the external RADIUS server, local accounts will be enabled
again for emergency access.
Authentication options will be available once this box is checked.
Auth Protocol
This specifies the authentication protocol used. Available options are MS-CHAP v2 and
PAP.
Auth Server
This specifies the access address of the external RADIUS server.
Auth Server
Secret
This is the secret for accessing the RADIUS server.
Auth Timeout
This option specifies the time value for authentication timeout.
Accounting Server
This specifies the access address of the external Accounting server.
Accounting Server
Secret
This is the secret for accessing the Accounting server.
Network
Connection
This option is for specifying the network connection which will be used for authentication
connection. Users can choose from LAN, WAN and VPN connections.
Security
This option is for specifying the protocol(s) through which the Web Admin Interface can be
accessible:
• HTTP
• HTTPS
• HTTP/HTTPS
Web Admin Port
These fields are for specifying the port number at which the Web Admin Interface can be
accessible.
Web Admin
Access
This option is for specifying the network interfaces through which the Web Admin Interface
can be accessible:
• LAN only
http://www.peplink.com -160 / 207 - Copyright © 2013 Peplink

peplink 20 Specifications

General

Load Balancing	Yes
VPN Support	Yes
Power over Ethernet (PoE)	No
LAN Ports	4
LAN Interface	4x GE
Wi-Fi Standard	802.11ac
PepVPN/SpeedFusion Throughput (AES 256	200 Mbps
Power Input	12V DC