2023-05
152
VisuNet RM Shell 6
How-Tos
The system will then pair with the Ident-Ex 01. After the device has been paired success-
fully, the blue LED indicator on the Ident-Ex 01 will turn on.
8. Navigate back to the "Hardware and Sound" section of the control panel. Select the "Device
Manager" under "Devices and Printers."
9. Right click on "Generic Bluetooth Radio" under the "Bluetooth" section.
10. Navigate to the "Power Management" tab and uncheck the option "Allow the computer to turn
off this device to save power."
To Next Page
Loading...
