Lambda 25, 35, 45 User’s Guide
76
Accessory Connections Overview
Figure 13 Accessories for the Lambda 25, 35, 45
Sample Compartment Cover
Some of the accessories used with the spectrometer require removal of the sample
compartment cover.
Do this carefully as follows:
1. Open the cover only about 90 degrees to the sample compartment.
2. Carefully slide the cover straight up off both hinges to remove.
To install the sample compartment cover, or other accessory cover, perform
this procedure in reverse.
PC
Multi-sipper Linear Transporter
AS 93plus
Autosam
le
Peltier Cell Change
Temperature Sensor
Peltier Cell Holder
Integrating
s
here
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
