Accessories
83
Requirements for Operation with Accessories
The following preconditions must be fulfilled in order to operate with accessories:
• The accessory in use must be activated on the accessory page of the UV
WinLab software.
• The connector panel for the accessory in question must be installed in the
spectrometer.
Some accessories, such as Peltier cell holder and 9 cell Peltier changer require
an upgrade board fitted to the power supply unit.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
