Accessories
77
Sample Compartment Front Cover
Some of the accessories used with the spectrometer require removal of the sample
compartment front cover.
Do this carefully as follows:
1. Open the sample compartment cover.
2. Loosen the two screws securing the front cover of the sample compartment.
3. Slide the front cover forwards and remove from the spectrometer.
To install the sample compartment front cover, perform this procedure in
reverse.
Sample Compartment Window
To remove or install certain accessories, you need to remove the sample
compartment windows.
Each window has a magnetic frame and should be carefully removed by hand.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
