Maintenance
93
Halogen Lamp Replacement
If the lamp burns out, or if the bulb becomes blackened after prolonged use, you
should replace the lamp.
Replacement lamp assemblies are provided complete with prealigned mounts (Part
Number B0114620).
Figure 18 Prealigned Halogen Lamp (B0114620)
WARNING
Electrical Hazard
Switch off the spectrometer and remove the plug from the electrical
supply before starting with the replacement.
Risk of Burns
If the old lamp was lighted: allow it to cool before proceeding with the
replacement.
UV Radiation
The lamps emit intense radiation which can damage your eyes.
Do not open the lamp compartment when the lamps are on.
Do not gaze into a lighted lamp.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
