Maintenance
97
1. Switch off the spectrometer and unplug the line power cord.
2. Remove the lamp compartment cover by pressing down the catch and pushing
the cover to the left.
3. Remove the lamp baffle by slackening the thumbscrews and lifting the lamp
baffle vertically upward.
Figure 22 Lamp baffle
4. Unplug the deuterium lamp connector from the terminal board by squeezing in
the two lugs at each side of the connector and carefully pulling the connector
vertically upward.
Thumbscre
Thumbscrew
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
