Delivery, transport and storage
Revision 3 | Granolyser / Granolyser HL operating instructions
4 Delivery, transport and storage
The delivery, transport and storage chapter is only intended for specialist operators.
4.1 Scope of delivery
The standard scope of delivery to the owner comprises: NIR analyzer
GRANOLYSER (GRANOLYSER HL),
measuring beaker 0.5 l, 5 thermal paper rolls, mains cable with removable connection (power connector
cable IEC 60320 C13), cleaning brush, operating and expert instructions.
4.2 Transport and packaging
Systems, machines and instruments from Pfeuffer GmbH are carefully tested and packaged prior to
dispatch, however it is not possible to exclude the risk of damage during transport.
Incoming check
Check for completeness with reference to the delivery note.
In case of damage
Check the delivery for damage (visual inspection).
In case of complaints
If the delivery suffered damage in transit:
Keep the packaging (to allow it to be checked subsequently by the forwarding company, or for sending
back).
Immediately inform the supplier or Pfeuffer GmbH.
4.3 Intermediate storage
The freight packaging of the
GRANOLYSER and the accessory/replacement parts is configured for a storage
duration of up to six months from delivery.
Do not place any heavy objects on the packaging.
Storage conditions
Enclosed, dry room with a room temperature between min. -10 °C and max. +60 °C.
4.4 Transport to the installation site (by the customer)
The transport is only allowed to be undertaken by specialist personnel according to the
local conditions and any information indicated on the packaging material.
Unpacking
To avoid damage to the housing and other components:
Open the packaging
Remove the accessory box
Remove the upper packaging elements
Lift the
GRANOLYSER out of the box using its holding handles
Note the weight, see technical data chapter 3
Move the
GRANOLYSER to the installation location, see chapter 5
Keep the original packaging in case you need to send the equipment back.