Pfeuffer Granolyser - Switch off GRANOLYSER

Operation
36 | 46
Granolyser / Granolyser HL operating instructions | Revision 3
Sample ID
Sample ID that is entered manually or with a barcode scanner at the start of the
measurement
Measurement no.
Serial measurement number that is automatically incremented by the
GRANOLYSER
Product
Product selected for the measurement
Date/Time
Date and time when the measurement was performed
Customer ID
Customer ID that is entered manually or with a barcode scanner at the start of
the measurement
User
Selected username
Param 1 to 8
Name of the measured parameter with the unit in square brackets.
Val 1 to 8
Measurement result for each individual parameter. The precise designation and
sequence is defined by the calibration, see next table.
Table 2: Explanation of the column names
7.9 Switch off GRANOLYSER
 Switch OFF the
GRANOLYSER using the main switch (position 0).