Revision 3 | Granolyser / Granolyser HL operating instructions
8 Maintenance and cleaning
The maintenance and cleaning chapter is only intended for specialist operators.
NOTICE
Opening the housing and inappropriate operation will invalidate the warranty.
To ensure trouble-free operation, it is essential for the GRANOLYSER to be cleaned and maintained at
regular intervals.
DANGER
Touching live parts can be fatal!
It is essential to comply with the switch-off procedure prior to cleaning, maintenance
or repair work! (see chapter 2.10)
During all work that is required, wear personal protective equipment according to the company
health and safety regulations.
Pay attention to local statutory accident prevention regulations!
The times for carrying out cleaning and maintenance work are based on one-shift
working (8 hour/day, 22 days/month, 12 months/year).
d = daily ¼ y = every three months
w = weekly ½ y = every six months
m = monthly y = yearly
ar = as required
NOTICE
The operating company must provide hazard and disposal information.
NOTICE
Following cleaning, maintenance or exchanging wearing parts, check that all safety
devices are functioning correctly.
8.1 Cleaning
NOTICE
Do not use any sharp objects or tools for cleaning. Only use objects that are expressly
intended for this purpose.
During cleaning, make sure that no water, steam or dust can penetrate the electronics
area.
To Next Page
Loading...
Need help?
General
