Granolyser / Granolyser HL operating instructions | Revision 3
Progress of optical measurement in
percent
Abort measurement
7.6 Display measurement result
With the HL variant, the bulk density
(weight/hectoliters) is not
determined until after the optical
measurement has taken place.
Print measurement result on
the integrated thermal printer
(For printing older measurement
results, see chapter 7.8.1)
Back to measuring menu with
same product
Back to product selection
NOTICE
Empty the drawer after each measurement!
If products are very moist, there is a possibility of condensation buildup, mold or
fermentation.
Clean the filling funnel and the drawer regularly to prevent mixing samples
together.
The operating company must provide hazard and disposal information.
To Next Page
Loading...
Need help?
General
