Revision 3 | Granolyser / Granolyser HL operating instructions
An application GRANOLYSER DATA-SERVER is available as an accessory that stores the data
from the GRANOLYSER into an MS Access® database on a server or external PC. Contact
Pfeuffer GmbH if you have any questions.
Products and measuring ranges, see chapter 6.3
.
Measurement settings, additional functions see chapter 7.7.5 and expert instructions.
Measurement results outside the calibration range are displayed with a comparison
character (˂ or ˃).
With an approved instrument (in
D/A) the approved value (moisture)
is enclosed in asterisks.
The approved measurement ranges
for the moisture can be found on the
type plate.
The bulk density result of the GRANOLYSER HL
is based on the actual moisture result of the sample, and is not adjusted to a lower
moisture value (9-14 %).
does not equal the EEC bulk density according to directive 71/347/EEC and may not
be used in legal transactions.
Display of red cross symbol † after
the result value, see chapter 9.
To Next Page
Loading...
Need help?
General
