Revision 3 | Granolyser / Granolyser HL operating instructions
Text field Sample ID:
Input field for the sample
designation or the barcode of the
sample for exact assignment of the
measurement in the measurement
results.
Text field Customer ID:
Input field for an individual customer
text.
The input fields also remain active
after starting the measurement.
The input fields can be filled by
entering them using the integrated
screen keyboard, a connected USB
keyboard or a USB barcode scanner.
The keys with a superscript character contain additional special characters. You select these by
touching the respective key for a longer time.
Select keyboard layout of the on-screen keyboard
Hide screen keyboard
Enter a sample/customer ID. Confirm your entry with the Enter key. The measurement is started.
After scanning a barcode, the measurement starts automatically.
If the input fields remain empty, the measurement does not start automatically. Then tap on
If this symbol next to the input fields is active, you can repeat the measurement with the sample
ID or the customer ID.
Put the product in the drawer back into the GRANOLYSER. Tap on this symbol and the previous
ID is taken over and displayed. The measurement starts automatically.
"Granolyser empty" message
There is no sample in the instrument:
Put in a sample (600 ml).
The message ends automatically
and the measurement starts.
A sufficient amount of sample has
been put into the instrument:
Tap on the "Granolyser not empty"
button.
The measurement starts.
To Next Page
Loading...
Need help?
General
