Philips BDP7200/12 - [Parental] Settings

English
EN 35
Adjust settings
[Digital Out]
When HDMI cable is connected, make sure
[HDMI Audio] setting is set to [Off] before
you change this setting. Refer to chapter
‘Set-up - Set digital output format’ for more
information.
Option Description
[Bitstream] Set the audio format for the
sound output from the
DIGITAL OUT (COAXIAL/
OPTICAL).
[PCM]
[Analogue Audio]
When HDMI cable is connected, make sure
[HDMI Audio] setting is set to [Off] before
you change this setting.
Option Description
[Speaker Setup] Set the speaker confi guration
to suite the size/number of
your speakers. Refer to
chapter ‘Set-up - Speaker
setup’ for more information.
You can also output
the test tone from each
speaker by pressing
Red
button.
•
[Speaker
Distance]
[Unit] : set the desired
measure system, default
setting is [Feet]. This
measure system will be
used for the speaker
distance setting.
Select the distance from
the listening point to the
speaker to get the ideal
delay time.
•
•
[Speaker Level] Set the volume level for each
speaker to get the ideal audio
balance.
•
•
[Parental] settings
[Rating Level]
Refer to chapter ‘Set-up - Set parental lock’
for more information.
Option Description
[All] Set the rating level for the
disc playback.
8 [Adult]
to
1 [Kid Safe]
[New PIN]
Option Description
Set the new password for
the [Parental] setting.
•