Philips BDP7200/12 - [Others] Settings

36 EN
[Others] settings
[Auto Standby]
Option Description
[On] Set whether to turn off the
unit (to the standby mode)
automatically after 25
minutes of no action since
the screen saver is activated.
If the screen saver is off, the
unit will be turned off after
30 minutes of no action.
[Off]
[Front Panel Brightness]
Option Description
[Bright] Set the brightness of the
front panel display. When
[Auto] is selected, the front
panel display automatically
goes dim during playback.
[Dim]
[Auto]
[Screen Saver]
Option Description
[On] Set whether to activate the
screen saver after 5 minutes
of no action on the unit.
[Off]
[Slide Show Interval]
Option Description
[5sec] Set the amount of time for
displaying one picture before
switching to the next one.
For example, select [5sec]
to switch the picture
every 5 seconds.
•
[10sec]
[Slide Show Transition]
Option Description
[Cut In/Out] The pictures cut in and out
sharply as playback
progresses.
[Fade In/Out] The pictures fade in and out
as playback progresses.
[EasyLink (HDMI CEC)]
This feature is available only when the
display device is connected by an HDMI
cable, and when it supports EasyLink (HDMI
CEC) feature. Refer to chapter ‘Set-up -
Activate EasyLink control’ for more
information.
Option Description
[On] Set whether to utilise the
EasyLink (HDMI CEC)
function. EasyLink (HDMI
CEC) function allows your
PHILIPS brand EasyLink TV
to act in conjunction with this
unit or vice versa.
[Off]
•