Philips BDP7200/12 - Activate Easylink Control; Reset to Factory Default

English
EN 43
Adjust settings
Activate EasyLink control
EasyLink (HDMI CEC) function allows your TV
(limited to PHILIPS brand EasyLink TV) to act in
conjunction with this unit, or vice versa.
1 Press HOME.
2 Select [Settings] > [Advanced Set-up] >
[Others] > [EasyLink (HDMI CEC)].
When [EasyLink (HDMI CEC)] setting is set to
[On], functions listed below will be available.
One touch play
When this unit is turned on, the TV also is
turned on and the appropriate external input
channel will be selected automatically. The
appropriate external input channel can also
be selected on your TV automatically when
you press PLAY , PREV í, NEXT ë,
number buttons, TOP MENU, HOME, INFO,
DISC MENU/POP-UP MENU, or of this unit
when the unit’s power is on.
Standby
When you press and hold 2 (Standby-On)
for 2 seconds, it turns off the power of the TV
fi rst and then turns off the power of this unit
also.
When the connected EasyLink (HDMI CEC)
compatible display device is turned off, this unit
may also turns off together.
System Information
- Get & Set Menu Language
The unit recognises the OSD language set for
the TV and automatically sets the same language
as the player menu language (OSD menu
language) for this unit.
This feature is available only when [Auto] is
selected in the [Player Menu] in the settings
menu.
•
Reset to factory default
You can reset the settings to default.
1 Press HOME.
2 Select [Settings] > [Factory Default], then
press OK.
3 Press  to highlight the desired option,
then press OK.
Option Description
[Settings] All the settings will be reset
to default, except for the
[Parental] setting.
[Local Storage] Local storage used for BD-
Java will be re-formatted.
4 Press OK to go back to the settings menu,
or press HOME to go back to the home
menu.