OPERATING THE
DVD PLAYER - BASIC OPERATION
This section of the Directions for Use manual begins to explain the operating procedures
of the DVD Player portion of this television.
L
et’s learn the simple operation of the TV’s
built-in DVD Player.
Unless otherwise stated, all operations can be
performed by using the remote control.
1
Press the POWER button on the
remote control (or the TV) to turn the
television ON.
2
Press the EJECT button on the
remote control to place the TV/DVD in
the DVD mode and to open the disc
tray.
3
Place your chosen disc in the tray. Be
sure that the disc label is facing up and
the disc is centered in the tray.
4
Press the EJECT button on the
remote control (or the EJECT button on
the TV) to close the disc tray.
5
The on-screen display will indicate that
the DVD Player is reading the disc.
Then playback of the disc will begin
automatically.
Note: If the “Child Lock” option is set to ON
within the User Preference Settings section,
the 4-digit access code must be entered or the
disc must be authorized. (See the “Access
Control” section within this manual.)
A default screen (DVD Video “blue” back-
ground) is displayed when the DVD Player is
in the STOP mode. It may contain a “Status
Window” and a “Temporary Feedback Field.”
This screen gives information concerning pro-
hibited actions, playback, modes, available
angles, etc.
The default screen (DVD
Video “blue” background)
will appear when the TV is
in the DVD operational
mode.
NOTE: All menu screen art
in this manual will be shown
without the default screen
(DVD Video blue back-
ground) for better clarity.
A “temporary feedback field” or
“status window” may be displayed
when the default screen (DVD Video
“blue” background) is displayed.
To Next Page
Loading...
