Philips DVT1300 - Accessories; Connecting Headphones; Connecting an External Microphone

17
Getting started
Table of contents
4.6 Accessories
Depending on the type of the device, the product package may include
various accessories. Additional accessories may be obtained directly from
your retailer.
4.6.1 Connecting headphones
Warning
• Set the volume to a moderate level and do not use headphones to
listen for excessively long periods of time. Exposure to intense sound
can cause a hearing impairment. Comply with the hearing safety
instructions (see also chapter 1.1.2 Hearing protection, page 5).
1
Turn down the volume of the device before you plug in the
headphones.
2
Insert the stereo jack into the headphone port on the top of the device.
INDEX HOLD ON/OFF
3
Turn up the volume until you reach a comfortable listening level. The
speaker is switched o when headphones are connected.
4.6.2 Connecting an external microphone
Note
• If you connect an external microphone to the device, the recording
source will switch automatically and the device's microphone will be
turned o.
1
Stop the recording currently in progress.
2
Insert the stereo jack into the microphone port on the top of the
device.
INDEX HOLD ON/OFF