31
Settings
Table of contents
8.1.5 Enabling/disabling voice-activated recording
If voice-activated recording is enabled, recording will start when you begin
speaking. When you stop speaking, the device will automatically pause
recording after three seconds of silence and resume once you begin
speaking again.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press h / b to select Voice Activation.
5
Press the record key g to confirm.
6
Press h / b to select On.
7
Press the record key g to confirm.
X If this feature is enabled, the Š symbol is displayed.
8
To turn o voice activation, press h / b and select Off.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
8.1.6 Setting auto divide
You can automatically split large recordings, such as a multi-hour meeting
recording. Once the set time has been reached, the device stops the
current recording and automatically starts a new one.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press h / b to select Auto divide.
5
Press the record key g to confirm.
6
Press h / b, to select whether longer recordings are to be
automatically divided after 30 or 60 minutes, or switch the feature o.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
To Next Page
Loading...
