Philips DVT1300 - Recording; Recording Settings

20
Recording
Table of contents
5 Recording
The device oers many features that you can use during recording or to
improve the quality of a recording. Use the timer and the voice activation
functions to start a recording automatically.
5.1 Recording settings
Before starting a recording session, set the required recording quality and
microphone sensitivity.
When you record in environments with lots of noise in the background (e.g.
while in a crowd or while traveling by train or car), you can enable the noise
reduction function to reduce the background noise (see also chapter 8.1.3
Enabling/disabling noise reduction, page 29).
Caution
• Do not remove batteries or rechargeable batteries from the device
while it is recording. If you do this, data may become damaged or lost.
Device malfunctions may also occur.
1
In stop mode (start-up screen), press the stop key j to select the
desired folder for the recording.
X The following icons are displayed: u, v, w, x.
2
Point the built-in microphone toward the sound source and press the
record key g.
X The device is recording and the record/play indicator lights up red.
The recording duration and the remaining recording time are displayed.
3
Press the record key g to pause recording.
X The record/play indicator flashes red.
4
Press the record key g to resume recording.
5
Press the stop key j to stop recording.
X The device returns to stop mode.