Philips DVT1300 - 9 Service

36
Service
Table of contents
9 Service
Do not perform any maintenance operations that are not described in this
manual. Do not disassemble the device into its component parts to carry
out repairs The device may only be repaired at authorized service centers.
9.1 Service functions on device
9.1.1 Displaying device information
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select Information.
5
Press the record key g to confirm.
6
Press h / b to select the required information.
7
Press the record key g to confirm.
X The display shows general device-related data: Device capacity
and remaining memory, device firmware version..
8
Press the stop key j to return to stop mode.
9.1.2 Memory formatting
Caution
• Formatting the memory deletes all recordings and files saved on the
device.
You can use this feature to delete all data and format the selected memory.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select Format memory.
5
Press the record key g to confirm.
6
Press + / – to select OK.
7
Press the record key g to confirm.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.