22
Recording
Table of contents
5.2.2 Using voice activation
When voice-activated recording is enabled, recording will start when you
begin speaking. When you stop speaking, the device will automatically pause
recording after three seconds of silence and will resume once you begin
speaking again.
Use the voice activation level to set the volume at which the device should
begin recording.
1
Customize the voice-activated recording settings in the Settings menu
and activate the feature (see also chapter 8.1.5 Enabling/disabling voice-
activated recording, page 31).
X If this feature is on, the Š symbol is displayed.
2
Press the record key g.
X The devices switches to standby mode. The (|) symbol indicating
that the recording is paused will be displayed. Recording will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence.
3
Press the stop key j to stop recording.
X The device returns to stop mode.
To Next Page
Loading...
