Philips DVT1300 - Quick Search; Adjusting Playback Speed; Repeating a File; Loop Sequence; Repeating a File

24
Playback
Table of contents
6.3 Quick search
You can quickly scan backward or forward within the current file. This
allows you to find a specific part of the recording.
1
During playback, press and hold one of the two navigation keys h or
b.
X The device quickly scans forward or backward through the
selected recording.
2
Release the key
X to resume playback at regular speed from the current position.
6.4 Adjusting playback speed
1
During playback, press the playback/pause key e for approximately
one second.
2
Press + / – to set the desired playback speed (-8 to +8).
X The playback speed display closes automatically after a few
seconds or can be closed by pressing the record key g or the
stopkeyj.
Note
• The selected playback speed is stored permanently, even when you
playback other files or turn o the device.
6.5 Repeating a file / loop sequence
You can automatically repeat playback of a certain file, an entire folder or a
recording sequence (= loop).
6.5.1 Repeating a file
1
In stop mode (start-up screen), press the menu key `.
2
Press h / b to select the Ò file menu.
3
Press the record key g to confirm.
4
Press h / b to select Repeat.
5
Press the record key g to confirm.
6
Press h / b to select whether you wish to automatically repeat
either the playback of an individual recording/file or a folder.
7
Press the record key g to confirm.
8
Press the stop key j twice to get back to the start-up screen.
X The symbol of the selected repeat mode is shown on the display:
Â–repeat a file
Á–repeat all files in a folder
Ä–Random playback
9
Press the playback/pause key e.
X Playback of the recording or folder starts.