Philips DVT1300 - Enabling;Disabling the Record Indicator

32
Settings
Table of contents
8.1.7 Enabling/disabling the record indicator
This function allows you to switch o the status LED.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select Record lamp.
5
Press the record key g to confirm.
6
Press h / b to select whether you want to turn the status LED on
or o.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
8.2 Display settings
8.2.1 Language selection
Note
• Your language might not be available. Select an alternative one.
1
In stop mode (start screen), press the menu key `.
2
Press the h / b key to select the display settings menu Ô.
3
Press the record key g to confirm.
4
Press h / b to select Language.
5
Press the record key g to confirm.
6
Press h / b to select the required display language.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.