Philips DVT1300 - 8 Settings

28
Settings
Table of contents
8 Settings
To enter the Settings menu, press the menu key ` while the device is
stopped (start screen).
Note
• Press the stop key j at the end of an operation to return to stop
mode. Press the stop key j during the operation to cancel the
operation without saving and return to stop mode.
8.1 Recording settings
8.1.1 Setting the recording quality
Use the recording quality settings to set the file format and the quality of
the recording as the bit rate. The higher the recording quality, the larger the
file and the fewer recordings you can create.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press h / b to select Quality settings.
5
Press the record key g to confirm.
6
Press h / b to select the required recording quality.
X The selected quality setting symbol will be displayed.
€–maximum quality, uncompressed,
format: WAV, 1,536 kbps
‹–high quality, format: MP3, 192 kbps
Ž–above-average recording time,
Format: MP3, 64 kbps
Œ– longer recording time, format: MP3, 8 kbps
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.