Philips DVT1300 - Auto-Off

35
Settings
Table of contents
8.3.2 AUTO-OFF
The device switches o automatically if no key is pressed within a pre-set
period of time. This saves power.
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select Auto off.
5
Press the record key g to confirm.
6
Press h / b to automatically turn the device o after 5, 15, 30 or 60
minutes of inactivity.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.
8.3.3 Enabling/disabling key and signal tones
1
In stop mode (start screen), press the menu key `.
2
Press h / b to select the device settings menu ×.
3
Press the record key g to confirm.
4
Press h / b to select Device sounds.
5
Press the record key g to confirm.
6
Press h / b, to enable/disable the key and signal tones.
7
Press the record key g to confirm.
8
Press the stop key j to exit the menu.
Tip
• Press the stop key j to cancel the operation without saving and return
to stop mode.