ErgoLine D330/D340
Customer Engineer Manual
Page 2-23
P
RIVATE
K
EY
(
FUNCTION CODE
100)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
P
ERSONAL
K
EY
(
FUNCTION CODE
101)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
Extension must operate in X- and D- mode.
E
XECUTIVE
K
EY
(
FUNCTION CODE
102)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
Extension must operate in X- and D- mode.
Owner of executive line must be switched absent or busy.
M
EMBER
K
EY
(
FUNCTION CODE
103)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
G
ROUPKEY
(
FUNCTION CODE
104)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
P
RIVATE
P
ARK
(
FUNCTION CODE
105)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
Park position must be defined for (group) DNR.
G
ROUP
P
ARK
(
FUNCTION CODE
106)
Facility code for call pick-up (facility number 49) has to be downloaded.
Group arrangement has the pick-up property.
Park position must be defined for (group) DNR.
A
LTERNATIVE
S
ECRETARY
(
FUNCTION CODE
107)
Facility codes for activate (facility number 32), cancel (facility number 33)
and follow-me primary (facility number 34) must be downloaded.
User must have follow-me entitled (ASFACM 7)
A
UTO
A
NSWER FOR
1 H
OUR
O
FF
/O
N
(
FUNCTION CODE
110)
Default setting is
auto answer for 1 hour off
.
Local function code for
auto answer for 1 hr
(facility number 38) may be
downloaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
To Next Page
Loading...
