Installing the Tilt/Swivel Mount (M3080A #A14)
Installin
the Instrument
103
Mounted to the GCX Wall Channel (M3080A #A15)
This option is used to mount the Monitor to a GCX Wall Channel but to also provide tilt and
swivel capability.
Step 1 Unpack the Tilt/Swivel mount and check all parts are available.
Step 2 Make sure the wall channel end-stop has been fitted.
Step 3 Secure the rail to the Tilt/Swivel mount with the 2 screws provided.
Step 4 Slide the adapter plate down the wall channel.
Step 5 Adjust the assembly to the correct height with the adjustable channel stop.
Step 6 Use adjustment knobs to adjust to the required tilt/swivel angle.
Hang the bed hanger over the rail.
Rail
To Next Page
Loading...
