Installing the Universal Pole Clamp (M3080A #C05)
Installin
the Instrument
107
Installing the Universal Pole Clamp (M3080A #C05)
This option is used to mount the Monitor on a pole or rail.
Step 1 Unpack the clamp and check all parts are available.
Step 2 Decide whether the clamp is to be secured for vertical positioning (on a pole) or for
horizontal positioning (on a rail). The rear of the Monitor is provided with 4 screw
holes to cover both positioning possibilities.
Step 3 Secure the clamp to the Monitor with the 2 screws provided.
Step 4 Tighten the screws.
Attach the clamp to the rail or pole as appropriate.
To Next Page
Loading...
