Installing the Tilt/Swivel Mount (M3080A #A14)
Installin
the Instrument
105
Attached to the Monitor
This option is used to attach the Tilt/Swivel mount directly to the rear of the Monitor. The
Monitor can then be mounted on the GCX Wall Channel or can be used together with the
Universal Pole Clamp.
Step 1 Unpack the Tilt/Swivel mount and check all parts are available.
Step 2 Secure the tilt/swivel mounting to the Monitor rear panel with the 2 screws
provided.
Step 3 Tighten the screws.
To Next Page
Loading...
