Philips Pathology Scanner SG20 - Check the Stage Area

Troubleshooting procedures Troubleshooting
79
4522 207 12671 * 2021-06-17
Pathology Scanner SG20 / SG60 / SG300
20. Carefully push the handler as far to
the right as possible (I).
21. Disconnect the cable from the ESD
bonding point (II).
I
II
22. Close the maintenance door.
23. Close the store door.
24. Select the power button on the
front to switch the scanner on.
I
II
Check the stage area
1. On the user interface, select
Unlock door.
2. Open the store door.
II
Unlock door
I
CAUTION
Broken slides and/or glass splinters can be present in the scanner. To prevent cuts or glass
splinters entering the skin, take appropriate precautions when solving the problem.