Philips PureProtect Mini 900 Series - Reset the Wi-Fi connection

10
English
2.4GHz
3 Make sure that your smart phone or tablet is successfully connected to your
Wi-Fi network.
Note:
Enable Bluetooth feature on your smart phone to ensure the smooth pairing.
Please ensure your smartphone is connected to a 2.4GHz (home) Wi-Fi
netwok instead of a 5GHz Wi-Fi network or public Wi-Fi. For a successful
pairing, we suggest turning off your mobile data before initiating the pairing
process.
4 Launch the Philips “ Air+” app and click on “Add a device” or press the “+”
button on the screen. Follow the on-screen instructions to connect the air
purifier to your network.
-
After a successful connection, the Wi-Fi indicator remains steady in white.
Note:
This instruction is only valid when the air purifier is being set up for the first time.
If the network has changed or the setup needs to be performed again.
If you want to connect more than one air purifier to your smart phone or tablet,
you can add the purifier in the app on additional smart phones without doing
the Wi-Fi connection reset on the device.
Make sure that the distance between your smart phone or tablet and the air
purifier is less than 10 m without any obstructions.
Reset the Wi-Fi connection
1
2
1 Put the plug of the air purifier in the power socket and press to turn on the
air purifier.
2 Long press and button at the same time for 3 seconds until you hear a
beep.
-
The air purifier goes to pairing mode.
-
The Wi-Fi indicator blinks orange.
3 Follow the steps 3-4 in “Setting up the Wi-Fi connection for the first
time”section.