21
English
2 Make sure the appliance is completely unplugged, and then put the power
adapter in the power socket.
3 Within 15 seconds after power on, press and hold the and button for
3seconds to reset the filter lifetime counter.
Storage
1 Turn off the air purifier and unplug from the power socket.
2 Clean the air purifier and the surface of the filter (see Chapter "Cleaning and
Maintenance").
3 Let all parts air dry thoroughly before storing.
4 Wrap the filter in air tight plastic bags.
5 Store the air purifier, filter in a cool, dry location.
6 Always thoroughly wash hands after handling filter.
Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country.
Problem Possible solution
The appliance does not work properly. Check if the base is properly installed. If not, for safety reason,
the appliance will stop operating.
The filter replacement alert is on but you have not replaced
the corresponding filter. As a result, the appliance is now
locked. In this case, replace the filter and reset the filter
lifetime counter.
The airflow that comes out of the air outlet
is significantly weaker than before.
The surface of the filter is dirty. Clean the surface of the filter
(see Chapter 'Cleaning and maintenance').
The air quality does not improve, even
though the appliance has been operating
for a long time.
Check if the packing material is removed from the filter.
To Next Page
Loading...
