PAGE 3-91097626, VER. 03
Recommended Separation Distance Between Portable and Mobile RF Communication Equipment
and Device
SimplyGo is intended for use in the electromagnetic environment in which radiated RF disturbances are
controlled. The user of Ever Go can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communication equipment (transmitters) and SimplyGo as
recommended below, according to the maximum output power of the communications equipment.
Rated
Maximum
Output Power
of Transmitter
(Watts)
Separation Distance According to Frequency of Transmitter (meters)
150 kHz to 80 MHz
d = 1.2
P
80 MHz to 800 MHz
d = 0.35
P
800 MHz to 2.5 GHz
d = 0.7
P
0.01 0.12 0.04 0.07
0.1 0.37 0.11 0.22
1 1.17 0.35 0.70
10 3.69 1.11 2.21
100 11.67 3.50 7.00
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power of the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects, and people.
To Next Page
Loading...
